Diggers Eco In-Ground Timber Protecta 4L

Diggers Eco In-Ground Timber Protecta 4L
Share

Diggers Eco In-Ground Timber Protecta 4L

Diggers Eco In-Ground Timber Protecta is a non hazardous ‘creosote alternative’ that provides a tough bitumen coating to improve protection against moisture and deterioration on timber and masonry surfaces.

This exciting product is now a BFA Registered Product (10949AP) – Biological Farmers Association
 
Typical Uses:
Increases the life of building materials in outdoor, below ground applications by sealing toxins in and keeping moisture out. Typically used on:
  • Fences, veranda posts and sleepers.
  • Garden stakes, logs and poles.
  • Retaining walls.
Features:
  • Easy to apply with brush, spray, roller or by dipping.
  • Contains ingredients that help inhibit mould, rot and other corroding effects on timber and masonry surfaces.
  • BFA Registered Product – certified for use on organic farms.
  • Contains no hazardous ingredients (as defined by the Australian Safety and Compensation Council).
  • Safer alternative to common timber treatments.
  • Flexible UV coating which expands and contracts with the timber.
Application:
1. Thoroughly shake and stir before and during application.
2. Clean any dirt or dust from timber and apply with a brush, roller, spray or by dipping. 
If brush clogs during use, soak in Diggers Kerosene.
3. Apply two coats and allow one hour between coats. Typical application rates are 8–10m² 
per litre per coat.
4. Posts should have the coating extended at least 10cm above ground level.
5. Clean equipment or spills with water while still wet. Dried spills can be removed with 
Diggers Mineral Turpentine.
6. To paint over Diggers Eco In-Ground Timber Protecta, allow to dry completely and use a 
water based acrylic paint.
Safety:
Wear suitable protective clothing, gloves and eye / face protection when using this product.