Yates BuffaloPRO Weed’n’Feed Granular 10kg

Yates BuffaloPRO Weed’n’Feed Granular 10kg
Share

Yates BuffaloPRO Weed’n’Feed Granular 10kg

Manufacturer: Yates
Ready to spread granular Weed’n’Feed that kill weeds and feeds lawns at the same time which is safe for use on Buffalo lawns.
 
Selective control of flat broadleaf weeds in lawns, with added fertiliser for healthy green lawn growth.
 
Features
 
Fast acting with visible weed control within days.
Rapid greening of the lawn.
Ideal for weeds such as thistles and dandelions.
Safe for buffalo & other common lawn types. A safer option if you’re unsure what lawn type you have.
 
How It Works
 
The iron has a salt burn effect so that flatweeds receive a relatively severe burn compared to the vertical blades of grass. Soluble iron and nitrogen are absorbed by the root system to provide strong green growth.
 
Ingredients
 
Active constituent 50g/kg Iron (Fe) present as Iron (II) Sulfate 
NPK analysis: 5 : 0 : 0 + FE 5)
 
Directions For Use
  • Measure lawn area and water well before application and calculate amount of product required
  • Apply 1kg (20 handfuls) over 15 square metres. A 10kg bag treats 150 square metres.
  • Apply product on to moist grass when weather is fine. Leave it on for 2 days, then water thoroughly.
  • Your lawn will turn black for a few days, but will recover to its normal state.
  • Apply 1 kg (20 handfuls) over 15 square metres and repeat at 6 week intervals.
Precautions
  • Do not allow material to spill or blow over onto hard or non-lawn surfaces as staining may occur.
  • Dry sweep immediately. For first few days after application avoid walking from treated area on to concrete or non-lawn surface as staining may occur.
  • To prevent staining during handling, avoid contact with clothes and wear gloves.
  • Do not exceed rate of application.
  • Do not use on lawns less than 6 months old or during hot or windy weather.
  • Do not apply to lawns suffering stress or if shade temperatures are expected to exceed 30°C within a 72 hour period.
  • Do not allow entry of children and pets into treated areas until product has been watered in.
  • Do not breathe dust. Avoid contact with skin and eyes.